1. Introduction

In order to check alarm messages in time, you can set device to push the alarm message to your mobile phone and check them.

2. Ensure App Permissions

Different smart phone systems have different default configurations in the notification permissions. You may need to confirm whether the notification permissions of M-Sight Pro is sufficient before using it.

There are differences in notification settings between different smart phone systems. Figure2 shows the notification settings for MIUI (Android) and iOS. 

Note：

Samsung app notifications need to be careful to tick the allow sound and vibration box at Alerts.

3. Enable Push Message on Your Devices

Camera: Checking the web interface of camera. Select Basic Settings→Network→More  in the configuration. Then, enable Push Message and edit the type.

PD model：

PE model：

NVR: Checking the web interface of your NVR. Select System→Network→More in the Settings. Then, enable Push Message and configure other settings.

Note: Make sure you have enabled the function corresponding to Push Event Type.

4. Configure Alarm Message on M-sight Pro APP

Step 1: Generally, Alarm Video Push in General Settings is turned on by default. You can also check it and change Alarm Push Interval as needed (from 30 seconds to 2 hours).

Step 2: Entering Alarm Message   and make sure that the devices which you want to get messages from have been checked. Press Bell to go to Alarm Push. 

Step 3: Selecting the Device in Alarm Push. And then you will get the notification from smart phone system. Meanwhile, the logs will be written in Alarm Message.

Tips: You can delete all Alarm Message logs if you want.

If you still have any questions you can contact Milesight support team. 

-----  END  -----